SunTouch Floor Warming WarnWire 100 Sq. Ft. 240-Volt Radiant Heating Wire

This 240 volt WarmWire(R) cable is designed for installation in interior floor areas and to provide heat to warm the floors and help keep bathrooms, kitchens, and entryway floors dry and safe. The cable system consists of an electric heating wire that is built with a tough, water-proof jacket and will cover 100 square feet when installed with 3 inch spacing. It is secured to the subfloor with HeatMatrix(TM) uncoupling membrane mat, CableStraps(TM) or hot glue, and then covered with thin-set or self-leveling mortar. Once the mortar has cured, connect the system to 120 volt AC power. The temperature of the floor is controlled with a SunStat programmable or non-programmable thermostat. An in-depth installation manual is included.

• Install below ceramic or porcelain tile, stone or brick floors or in a self-leveling mortar bed below vinyl floors, floating wood and laminate floors
• UL Listed in both US and Canada for safety
• Dual wire technology reduces electromagnetic fields to ultra-low levels
• WarmWire can be connected in parallel for larger floor surfaces up to 150 sq. ft. in 120-volt systems and 300 sq. ft. in 240-volt systems
• Approved for shower installation where permitted by the local Authority Having Jurisdiction (AHJ)
• Choose from multiple SunStat thermostat options (sold separately)

Features

Flooring Product Type	Underfloor Heating
Returnable	180-Day
Product Weight (lb.)	7 lb
Product Width (in.)	3 in
Manufacturer Warranty	25 Year Limited Warranty